Specifications:
|
Structure and Finish
|
|
Locker shall be manufactured of molded fiberglass reinforced plastic composite with a solid color stipple texture finish. Material shall be E-glass and polyester resin at 35% ratio.Tensile Strength, 18,000 psi. Locker shall be one piece with no external or internal frame and no seams or joints on tops or side walls. Material shall withstand over 300 lb/sqft on roof and 200 lb/sqft on walls/doors.No on site assembly shall be required.
Roof shall be crowned for water run off and all corners shall have a smooth radiused finish. Finish of UV stabilized gelcoat does not need painting, allows solvent removal of graffiti and is resistant to impact and U.V. damage.Two standard colors, Tan & Medium Gray. Custom colors matched to your color sample. Interior divider wall on model 302 shall be sealed OSB exterior board and bottom edge shall be a minimum of 1” above ground level.
|
|
|
|
Fort Lock 7 pin tumbler Pop Out “T” handle locks with three keys and removable lock cylinders. Internal locking hardware consists of three plated hardened steel cams controlling an extruded aluminum locking bar which engages the door frame over three foot span. High quality custom continuous door hinge will not rust. All fasteners on locking system shall be zinc plated or better. Locker shall anchor in all four corners through base flanges using expansion anchors.
|
|
|
 |
Fiberglass composite floors are ideal for storage lockers or if lockers cannot be anchored.
|
|
|
Electronic locking systems. iButton® or card reader.
|
|
|
Heavy duty stainless steel pad lock handle will accommodate high security pad locks.
|
|
|
Coin and Token operated locks for collection or money return.
|
|
|
MEDECO™ stainless steel locks with T-Handle.
|
|
Ventilation System, stainless steel vents on doors for dissipation of heat and dampness.
|
|
Safety-View™ windows and walls to check contents of lockers. Acrylic or expanded metal.
|
|
Standard colors or let us match your color
|
|
|
|
|
|
Tan
|
|
Medium Gray
|
|
|
|
Contact us for a price sheet for more options. (Material strength comparison available on request)
|
|
|
|
|
|
|
|
|
|
back to top
|
|
|
